Code lookup
E4 appliance error code
The same visible code can mean different things depending on brand, appliance type, and model family. Choose the closest match before taking action.
Compare source-backed meanings
| Brand and appliance | Meaning | Use guidance | Source status | Open record |
|---|---|---|---|---|
| Candy Washer E4Aliases E04The CS 148TW4/1-80 manual shows E4 on display models and four indicator flashes followed by a five-second pause on models without a display; E04 is a padded search form, not a separate fault. | Candy documents E4 on washer model CS 148TW4/1-80 as too much foam and/or water. | Stop useStop using it and review the matching record before any reset. | Official manufacturer supportofficial Candy support; verified 2026-07-30 | Exact record |
| Defy Washer E4The exact DTL165 error table labels E4 as overflow and gives only a service-agent or dealer route, not an owner troubleshooting sequence. | Defy's DTL165 manual documents E4 as an overflow condition that requires authorised service. | Stop useStop using it and review the matching record before any reset. | Official manufacturer supportofficial Defy support; verified 2026-07-30 | Exact record |
| Frigidaire Washer E4Frigidaire documents this E4 article for top-loading washers. | Commonly logged when a Frigidaire top-load washer is out of balance during spin. | Limited checks onlyCheck the model-family note before assuming this code meaning. | Official manufacturer supportofficial Frigidaire support; verified 2026-07-22 | Exact record |
| Haier Washer E4Haier's E4 guidance is scoped to portable washers and starts with the household water supply and pressure, not an assumed internal-part diagnosis. | Manufacturer guidance usually ties E4 to a portable-washer fill issue involving supply or pressure. | Stop useStop using it and review the matching record before any reset. | Official manufacturer supportofficial Haier support; verified 2026-07-30 | Exact record |
| Hoover Washer E4Aliases E04The H3W492DE/1-80 manual shows E4 on display models and four LED flashes followed by a five-second pause on models without a display; E04 is a common padded search form, not a separate fault. | Hoover documents E4 on washer model H3W492DE/1-80 as too much foam and/or water. | Stop useStop using it and review the matching record before any reset. | Official manufacturer supportofficial Hoover support; verified 2026-07-30 | Exact record |
Coverage context
This page compares covered records for the same visible code. Use it as a starting point, then open the exact brand and appliance record before taking action.
Current coverage
Why context matters
A visible code is not a diagnosis by itself. The current E4 comparison covers 5 brands and 1 appliance type. Brand, appliance type, and model family decide which record applies.
Use the exact record links below before trying reset steps or deciding whether the appliance can be used.
Current contexts
Missing your brand or appliance?
Do not assume E4 has the same meaning on a different brand, appliance type, or model family. Open search with this code to use the coverage request draft when no exact match exists.
Safety reminder
Stop and use qualified service for water near electrical parts, burning smells, gas odor, miswired range warnings, unsafe refrigerator temperatures, or repeated failed resets.
Safety guide