What to check first
Stop normal operation while this warning is active. Follow only the documented safe checks or protective-drain instructions for the exact model.
Basic checks
- Open and close the door once without forcing it; if CL or Cd clears, the latch engaged normally.
- Inspect rack edges and tall items from the open doorway; if anything touches the door, reposition it before closing.
- Look at the visible latch and strike area without removing panels; if either is cracked or misaligned, leave the dishwasher off and avoid forcing the door.
- Start one cycle only after the door closes evenly; if the display returns, stop use and arrange service.
Applicability
Broad appliance guidance · Electrolux dishwashers
Electrolux presents CL and Cd for dishwashers generally; confirm the exact model guide because display form, latch design, and controls can vary.
Reset or retry steps
- Electrolux says CL or Cd turns off when the door is completely closed and successfully latched; no repeated power reset is needed.
When to call a technician
- Contact service if the door will not close and latch normally after visible loading obstructions are removed.
- Stop use and arrange service if the door, latch, or strike is damaged, or if water leaks or an electrical odor appears.
Before approving a paid visit, check warranty status and reviewquestions to ask before repair.
Can I keep using it?
Do not keep using the appliance if the code points to voltage, wiring, control power, burning smell, smoke, or a possible miswired supply.
- Safe next step
- Use only safe owner-level power checks, then involve a qualified technician or electrician when the source points to wiring or supply voltage.
- Stop when
- Breakers trip, lights dim, the appliance smells hot, wiring may be miswired, or the warning returns after a safe reset.
Stop normal use when water is visible or a leak warning is active. Stay clear if water could reach wiring or controls.
- Safe next step
- Follow the code-specific shutdown or protective-drain instructions, turn off water when appropriate, and avoid repeated resets. Do not interrupt a documented protective-drain sequence just to clear the display.
- Stop when
- Water is near wiring, cabinetry is getting wet, the leak returns, or the source is not safely visible.
Safety boundaries
Safe first
- Match the exact brand, appliance type, and displayed code first.
- Use the model manual as the final authority for access steps.
- Disconnect power before any service-access step.
Do not do this
- Do not continue normal cycles while this code is active; any protective-drain sequence must follow the exact model instructions.
- Do not bypass locks, float switches, leak sensors, or other safety systems.
Common causes include
- Dishwasher door not completely closed
- Door latch did not engage successfully
FAQ
What does Electrolux Dishwasher code CL usually mean?
Usually indicates that the dishwasher door has not closed and latched successfully. Model context matters: Electrolux groups CL and Cd as alternate displays for the same open-door or unsuccessful-latch condition.
Can I keep using the dishwasher with code CL?
Stop normal operation until the issue and safety warnings have been addressed. Follow only the documented safe checks or protective-drain instructions for your model. Do not force the dishwasher door or bypass its latch or switch.
When should I call a technician for Electrolux CL?
Contact service if the door will not close and latch normally after visible loading obstructions are removed. A qualified technician may check Door latch, Door strike, and Door alignment against the model's service information before treating any part as failed.