Source guide
GE Washer error-code sources
This page shows how the current GE washer records are sourced, when they were verified, and where users can inspect the original manufacturer guidance.
Records covered5
Source URLs3
Source typeofficial
Last verified2026-10-26
Covered records
GE Washer CAnCELEd: GE documents CAnCELEd in more than one top-load control context; the required recovery depends on the exact model and display.GE Washer dE: Usually indicates that the washer paused because its lid was opened.GE Washer FE: Usually indicates that the washer has detected water at a critical level.GE Washer H2O Supply: GE documents H2O Supply on front-load washers as a water-supply or pressure-sensing warning; the code alone does not identify a failed part.GE Washer UE: Usually indicates that the laundry load is unbalanced in the washer.
Source hosts
- products.geappliances.com
Source links are kept visible on each record page. FaultCodeLab uses short summaries and does not copy manuals or support pages verbatim.
Source URLs
https://products.geappliances.com/appliance/gea-support-search-content?contentId=000060308Cited by reviewed records: H2O Supply.Latest record verification: 2026-10-26.AI-assisted individual review of GE Appliances primary article and separately scoped secondary guidance where present. Read the complete front-load H2O Supply article and CHI table separately. Preserved the four-minute protective drain, supply-on check and direct service boundary; removed invented hose/freezing corrections and a trial fill. Distinguished CHI control lockout/resume from front-load pumping despite identical durations. No technician, hands-on or native-language approval.Reverified the front-load H2O Supply scope, four-minute drain-pump protection period, and service boundary after the water supply is confirmed on.https://products.geappliances.com/appliance/gea-support-search-content?contentId=23082Cited by reviewed records: CAnCELEd, dE.Latest record verification: 2026-10-26.AI-assisted individual review of GE Appliances primary article and separately scoped secondary guidance where present. Read both complete CAnCELEd sections. Corrected the false attribution of four-minute lockout to the primary non-spin article and separated two real procedures instead of composing a universal reset. Retained the one-minute power-off branch only for its documented control context, with safety and failed-path service boundaries. No technician, hands-on or native-language approval.AI-assisted individual review of GE Appliances primary article and separately scoped secondary guidance where present. Read the space-saving top-load pause section and secondary CHI dE row. Retained actual closure/Start-Pause and approximately 30-second shutoff behavior, removed inferred latch parts and kept a site-attributed single attempt. No generic four-minute or motor-reset sequence is imported. No technician, hands-on or native-language approval.Verified CAnCELEd as a non-specific stopped-cycle help message, preserved the timed lockout, and avoided presenting it as a confirmed control-part failure.Verified dE and E2 as alternate lid-open pause displays for GE space-saving top-load washers and kept lid-lock bypass instructions out of owner checks.https://products.geappliances.com/appliance/gea-support-search-content?contentId=35949Cited by reviewed records: CAnCELEd, dE, FE, H2O Supply, UE.Latest record verification: 2026-10-26.AI-assisted individual review of GE Appliances primary article and separately scoped secondary guidance where present. Read FE’s explicit critical-water-level instruction: turn off water and power and call service. Preserved that source-specific sequence rather than a generic drain exception, clarified safely reachable applicable valves and removed speculative replacement parts. No technician, hands-on or native-language approval.AI-assisted individual review of GE Appliances primary article and separately scoped secondary guidance where present. Read the own UE row independently from the Spin-light row. Retained even load distribution and level/stable installation observation; removed invented Drain & Spin, basket rotation testing and failed-part guesses. Model-specific normal controls remain governed by the manual. No technician, hands-on or native-language approval.Verified FE as GE's critical-water-level message and preserved the manufacturer's immediate water-off, power-off, and service boundary without adding a reset workaround.Verified UE as GE's unbalanced-load help message and limited owner action to stopped-basket load redistribution, leveling checks, and one monitored spin retry.
Source review log
2026-10-26 - verifiedAI-assisted individual review of GE Appliances primary article and separately scoped secondary guidance where present. Read both complete CAnCELEd sections. Corrected the false attribution of four-minute lockout to the primary non-spin article and separated two real procedures instead of composing a universal reset. Retained the one-minute power-off branch only for its documented control context, with safety and failed-path service boundaries. No technician, hands-on or native-language approval.2026-10-26 - verifiedAI-assisted individual review of GE Appliances primary article and separately scoped secondary guidance where present. Read FE’s explicit critical-water-level instruction: turn off water and power and call service. Preserved that source-specific sequence rather than a generic drain exception, clarified safely reachable applicable valves and removed speculative replacement parts. No technician, hands-on or native-language approval.2026-10-26 - verifiedAI-assisted individual review of GE Appliances primary article and separately scoped secondary guidance where present. Read the complete front-load H2O Supply article and CHI table separately. Preserved the four-minute protective drain, supply-on check and direct service boundary; removed invented hose/freezing corrections and a trial fill. Distinguished CHI control lockout/resume from front-load pumping despite identical durations. No technician, hands-on or native-language approval.2026-10-26 - verifiedAI-assisted individual review of GE Appliances primary article and separately scoped secondary guidance where present. Read the own UE row independently from the Spin-light row. Retained even load distribution and level/stable installation observation; removed invented Drain & Spin, basket rotation testing and failed-part guesses. Model-specific normal controls remain governed by the manual. No technician, hands-on or native-language approval.2026-10-26 - verifiedAI-assisted individual review of GE Appliances primary article and separately scoped secondary guidance where present. Read the space-saving top-load pause section and secondary CHI dE row. Retained actual closure/Start-Pause and approximately 30-second shutoff behavior, removed inferred latch parts and kept a site-attributed single attempt. No generic four-minute or motor-reset sequence is imported. No technician, hands-on or native-language approval.2026-07-30 - verifiedReverified the front-load H2O Supply scope, four-minute drain-pump protection period, and service boundary after the water supply is confirmed on.2026-07-30 - verifiedVerified CAnCELEd as a non-specific stopped-cycle help message, preserved the timed lockout, and avoided presenting it as a confirmed control-part failure.2026-07-30 - verifiedVerified dE and E2 as alternate lid-open pause displays for GE space-saving top-load washers and kept lid-lock bypass instructions out of owner checks.
Coverage gaps
- H2O is referenced for context but does not yet have a dedicated reviewed record in this brand/appliance cluster.
- Exact model-family pages remain gated until an official or manual-backed source supports the model-specific wording.
- Parts and service handoffs are not shown as recommendations until the source context is strong enough.
How this guide should be used
- Use the source links to verify the original manufacturer context.
- Check model notes before treating a display code as universal.
- Prefer safe first checks before any disassembly or parts decision.
Current limitations
- Manufacturer guidance can differ by model family and region.
- Alias/display variants are only added when the source supports them.
- Manual-backed model detail is planned but not bulk-generated.