Source guide
Indesit Washer error-code sources
This page shows how the current Indesit washer records are sourced, when they were verified, and where users can inspect the original manufacturer guidance.
Records covered6
Source URLs2
Source typeofficial
Last verified2026-10-25
Market scopeUnited Kingdom
Covered records
Indesit Washer F01: The Indesit UK guide documents F01 as an electronic circuit-board fault that may make some or all washer functions unavailable.Indesit Washer F02: The Indesit UK guide documents F02 as a motor-circuit fault that may cause intermittent or absent drum rotation.Indesit Washer F03: The Indesit UK guide documents F03 as a temperature-sensing fault that may prevent expected heating.Indesit Washer F05: The Indesit UK guide documents F05 as a waste-path blockage or pump issue that may leave water in the drum.Indesit Washer F06: The Indesit UK guide documents F06 as a door-lock fault that may prevent opening, closing, or starting a programme.Indesit Washer F18: The Indesit UK guide documents F18 as an internal data error that may disable some or all display and control functions.
Source hosts
- indesitservice.co.uk
Source links are kept visible on each record page. FaultCodeLab uses short summaries and does not copy manuals or support pages verbatim.
Source URLs
https://indesitservice.co.uk/safety-noticeCited by reviewed records: F06.Latest record verification: 2026-10-25.AI-assisted read of the official safety-notice page: the washing-machine category names 2014–2018 and links the manufacturer checker. No individual model or serial-number eligibility was checked.https://indesitservice.co.uk/washing-machine-repair/error-codesCited by reviewed records: F01, F02, F03, F05, F06, F18.Latest record verification: 2026-10-25.AI-assisted reading of the official UK digital-code entry F01, its own action and neighbouring reset/service rows. Read the F01 row and its own timed restart instruction. Retained the documented minimum two-minute unplugged period, 30-second wait and bounded single start; removed symptom padding and an unestablished replacement-part label. No technician, hands-on or native-language approval.AI-assisted reading of the official UK digital-code entry F02, its own action and neighbouring reset/service rows. Read the F02 symptom and service action. Removed unsupported unloading, repeated-load explanations and drive-motor replacement guesses; kept service-only owner boundaries without inheriting F01 timing. No technician, hands-on or native-language approval.AI-assisted reading of the official UK digital-code entry F03, its own action and neighbouring reset/service rows. Read the F03 sensing/heating symptom and engineer action. Kept the drying reference conditional on models with that function; removed unsupported replacement systems and an owner heating test. No technician, hands-on or native-language approval.AI-assisted reading of the official UK digital-code entry F05, its own action and neighbouring reset/service rows. Read the F05 waste/pump row and model-dependent filter qualifier. Removed the invented monitored-drain retry and replacement-part list; retained safe exact-handbook access, visible waste checks and engineer escalation. No technician, hands-on or native-language approval.AI-assisted reading of the official UK digital-code entry F06, its own action and neighbouring reset/service rows. Read the F06 obstruction/service row and separately re-read the official safety-notice category and washer checker link. Removed generic lock/latch replacements and did not infer recall eligibility from the code. No technician, hands-on or native-language approval.AI-assisted reading of the official UK digital-code entry F18, its own action and neighbouring reset/service rows. Read the F18 row and its own timed restart instruction. Retained the documented minimum two-minute unplugged period, 30-second wait and bounded single start; removed symptom padding and an unestablished replacement-part label. No technician, hands-on or native-language approval.Verified the F01 circuit-board label, unavailable-functions symptom, two-minute disconnect, 30-second wait, and engineer boundary on the official Indesit UK washer page.Verified the F02 motor-circuit label, intermittent or absent drum-rotation symptom, and direct engineer boundary on the official Indesit UK washer page.Verified the F03 temperature-sensing label, absent-heating symptom, and direct engineer boundary on the official Indesit UK washer page.Verified the F05 waste-pipe or pump label, retained-water and door symptoms, model-dependent filter qualifier, visible waste-path checks, and service boundary on the official Indesit UK washer page.Verified the F06 door-lock label, opening/closing/start symptoms, visible-obstruction limit, engineer boundary, and model-specific safety-notice referral on the official Indesit UK washer page.Verified the F18 internal-data label, partial or complete display/function loss, two-minute disconnect, 30-second wait, and engineer boundary on the official Indesit UK washer page.
Source review log
2026-10-25 - verifiedAI-assisted read of the official safety-notice page: the washing-machine category names 2014–2018 and links the manufacturer checker. No individual model or serial-number eligibility was checked.2026-10-25 - verifiedAI-assisted reading of the official UK digital-code entry F01, its own action and neighbouring reset/service rows. Read the F01 row and its own timed restart instruction. Retained the documented minimum two-minute unplugged period, 30-second wait and bounded single start; removed symptom padding and an unestablished replacement-part label. No technician, hands-on or native-language approval.2026-10-25 - verifiedAI-assisted reading of the official UK digital-code entry F02, its own action and neighbouring reset/service rows. Read the F02 symptom and service action. Removed unsupported unloading, repeated-load explanations and drive-motor replacement guesses; kept service-only owner boundaries without inheriting F01 timing. No technician, hands-on or native-language approval.2026-10-25 - verifiedAI-assisted reading of the official UK digital-code entry F03, its own action and neighbouring reset/service rows. Read the F03 sensing/heating symptom and engineer action. Kept the drying reference conditional on models with that function; removed unsupported replacement systems and an owner heating test. No technician, hands-on or native-language approval.2026-10-25 - verifiedAI-assisted reading of the official UK digital-code entry F05, its own action and neighbouring reset/service rows. Read the F05 waste/pump row and model-dependent filter qualifier. Removed the invented monitored-drain retry and replacement-part list; retained safe exact-handbook access, visible waste checks and engineer escalation. No technician, hands-on or native-language approval.2026-10-25 - verifiedAI-assisted reading of the official UK digital-code entry F06, its own action and neighbouring reset/service rows. Read the F06 obstruction/service row and separately re-read the official safety-notice category and washer checker link. Removed generic lock/latch replacements and did not infer recall eligibility from the code. No technician, hands-on or native-language approval.2026-10-25 - verifiedAI-assisted reading of the official UK digital-code entry F18, its own action and neighbouring reset/service rows. Read the F18 row and its own timed restart instruction. Retained the documented minimum two-minute unplugged period, 30-second wait and bounded single start; removed symptom padding and an unestablished replacement-part label. No technician, hands-on or native-language approval.2026-07-30 - verifiedVerified the F01 circuit-board label, unavailable-functions symptom, two-minute disconnect, 30-second wait, and engineer boundary on the official Indesit UK washer page.
Coverage gaps
- Exact model-family pages remain gated until an official or manual-backed source supports the model-specific wording.
- Parts and service handoffs are not shown as recommendations until the source context is strong enough.
How this guide should be used
- Use the source links to verify the original manufacturer context.
- Check model notes before treating a display code as universal.
- Prefer safe first checks before any disassembly or parts decision.
Current limitations
- Manufacturer guidance can differ by model family and region.
- Alias/display variants are only added when the source supports them.
- Manual-backed model detail is planned but not bulk-generated.