Source guide
LG Dryer error-code sources
This page shows how the current LG dryer records are sourced, when they were verified, and where users can inspect the original manufacturer guidance.
Records covered6
Source URLs4
Source typeofficial
Last verified2026-10-26
Market scopeUnited States
Covered records
LG Dryer d80: LG documents d75/d80/d90/d95 as increasing exhaust-restriction warnings; d80 on some gas dryers may instead accompany a gas-supply issue.LG Dryer dE: LG documents dE as a warning that the dryer door is open or not closing as expected.LG Dryer nP: LG documents nP as a warning that the electric dryer does not detect heater current, often pointing to the home supply.LG Dryer PF: This code commonly appears when power to the LG dryer was interrupted during operation.LG Dryer PS: LG documents PS as a warning that the dryer detected improper voltage at the power cord or its installation.LG Dryer tE1: LG documents tE1/tE3 as thermistor-related warnings and separates tE2 in cold steam-cycle conditions; preserve the full suffix before choosing a procedure.
Source hosts
- lg.com
Source links are kept visible on each record page. FaultCodeLab uses short summaries and does not copy manuals or support pages verbatim.
Source URLs
https://www.lg.com/us/support/help-library/lg-dryer-error-code-list--20152310891742Cited by reviewed records: d80, dE, nP, PF, PS, tE1.Latest record verification: 2026-10-26.AI-assisted read of the official LG own-code sections. Read the complete textual nP section/transcript for 240-volt supply, at-least-ten-second breaker reset and electrician-before-appliance escalation. The dedicated video landing page has no captured action transcript and is used for code identity only, not invented video evidence. Removed unestablished one-leg/part diagnoses and attributed the one-attempt safety limit to the site. No technician, hands-on or native-language approval.AI-assisted read of the official LG own-code sections. Read the main code-list airflow/gas section and the dedicated d90/d95 article. Kept different reported restriction percentages, primary gas-d80 caveat, explicit stop-use until exhaust repair and the documented Air Dry vent check after safe correction. Removed speculative parts and unsafe vague trial operation; retained owner access limits and qualified vent/gas support. No technician, hands-on or native-language approval.AI-assisted read of the official LG own-code sections. Read the own PF transcript and panel, including power-off before five-second Start/Pause, power restoration and cycle retry. Retained the documented path, removed unestablished electrical-part diagnoses and distinguished the site’s one-attempt/known-safe-supply limits from the source text. No separate nP/PS wiring test is borrowed. No technician, hands-on or native-language approval.AI-assisted read of the official LG own-code sections. Read the PS own row and surrounding installation/reset material. Preserved improper-voltage/possible-connection context without reproducing internal wiring steps, removed speculative replacement lists and explicitly attributed the stricter no-owner-reset boundary to the site rather than claiming LG supplies no reset. No technician, hands-on or native-language approval.AI-assisted read of the official LG own-code sections. Read the transcript and own tE1/tE3 and tE2 sections, including unpowered five-second Start/Pause and the distinct cold-steam SteamFresh/Big branch. Removed invented cool-down permission and airflow diagnoses for all tE codes. Preserved full-suffix/model separation within the existing alias data model, no internal access and a site-attributed single attempt. No technician, hands-on or native-language approval.Rechecked LG's US dryer error-code list for tE1, tE2, and tE3 and retained one canonical temperature-sensor family with suffix context in the record notes.Rechecked LG's US Flow Sense guidance, preserved d75/d90/d95 as aliases, and moved every gas-supply action behind an installer or gas-utility boundary.Verified PF against LG's dryer power-loss article and limited continued use to one reset after a confirmed outage with no hazard signs.Verified PS in LG's official dryer error-code list and deliberately excluded its terminal-block installation walkthrough from owner-facing checks.https://www.lg.com/us/support/help-library/lg-dryer-understanding-d90-and-d95-error-codes--20150209089448Cited by reviewed records: d80.Latest record verification: 2026-10-26.https://www.lg.com/us/support/help-library/lg-dryer-why-is-a-de-error-code-displayed-on-my-electric-dryer--20153089426906Cited by reviewed records: dE.Latest record verification: 2026-10-26.AI-assisted read of the official LG own-code sections. Read the dedicated dE article and separate general-list dE section. Corrected attribution of filter care and five-second power reset, preserved actual close/Start-Pause guidance and the general-list reset option under exact-model safe conditions. Removed replacement-part guesses and repeated or forced-door attempts. No technician, hands-on or native-language approval.Verified dE against LG's dedicated dryer door-error article and kept latch access, switch bypassing, and forced closure outside owner guidance.https://www.lg.com/us/support/help-library/troubleshooting-an-np-error-message-on-an-lg-dryer--20152825754317Cited by reviewed records: nP.Latest record verification: 2026-10-26.Verified nP against LG's dedicated dryer article and limited owner guidance to external plug observation and one breaker reset, with voltage checks assigned to a licensed electrician.
Source review log
2026-10-26 - verifiedAI-assisted read of the official LG own-code sections. Read the complete textual nP section/transcript for 240-volt supply, at-least-ten-second breaker reset and electrician-before-appliance escalation. The dedicated video landing page has no captured action transcript and is used for code identity only, not invented video evidence. Removed unestablished one-leg/part diagnoses and attributed the one-attempt safety limit to the site. No technician, hands-on or native-language approval.2026-10-26 - verifiedAI-assisted read of the official LG own-code sections. Read the dedicated dE article and separate general-list dE section. Corrected attribution of filter care and five-second power reset, preserved actual close/Start-Pause guidance and the general-list reset option under exact-model safe conditions. Removed replacement-part guesses and repeated or forced-door attempts. No technician, hands-on or native-language approval.2026-10-26 - verifiedAI-assisted read of the official LG own-code sections. Read the main code-list airflow/gas section and the dedicated d90/d95 article. Kept different reported restriction percentages, primary gas-d80 caveat, explicit stop-use until exhaust repair and the documented Air Dry vent check after safe correction. Removed speculative parts and unsafe vague trial operation; retained owner access limits and qualified vent/gas support. No technician, hands-on or native-language approval.2026-10-26 - verifiedAI-assisted read of the official LG own-code sections. Read the own PF transcript and panel, including power-off before five-second Start/Pause, power restoration and cycle retry. Retained the documented path, removed unestablished electrical-part diagnoses and distinguished the site’s one-attempt/known-safe-supply limits from the source text. No separate nP/PS wiring test is borrowed. No technician, hands-on or native-language approval.2026-10-26 - verifiedAI-assisted read of the official LG own-code sections. Read the PS own row and surrounding installation/reset material. Preserved improper-voltage/possible-connection context without reproducing internal wiring steps, removed speculative replacement lists and explicitly attributed the stricter no-owner-reset boundary to the site rather than claiming LG supplies no reset. No technician, hands-on or native-language approval.2026-10-26 - verifiedAI-assisted read of the official LG own-code sections. Read the transcript and own tE1/tE3 and tE2 sections, including unpowered five-second Start/Pause and the distinct cold-steam SteamFresh/Big branch. Removed invented cool-down permission and airflow diagnoses for all tE codes. Preserved full-suffix/model separation within the existing alias data model, no internal access and a site-attributed single attempt. No technician, hands-on or native-language approval.2026-07-30 - verifiedRechecked LG's US dryer error-code list for tE1, tE2, and tE3 and retained one canonical temperature-sensor family with suffix context in the record notes.2026-07-30 - verifiedRechecked LG's US Flow Sense guidance, preserved d75/d90/d95 as aliases, and moved every gas-supply action behind an installer or gas-utility boundary.
Coverage gaps
- Exact model-family pages remain gated until an official or manual-backed source supports the model-specific wording.
- Parts and service handoffs are not shown as recommendations until the source context is strong enough.
How this guide should be used
- Use the source links to verify the original manufacturer context.
- Check model notes before treating a display code as universal.
- Prefer safe first checks before any disassembly or parts decision.
Current limitations
- Manufacturer guidance can differ by model family and region.
- Alias/display variants are only added when the source supports them.
- Manual-backed model detail is planned but not bulk-generated.