Symptom hub
Dryer restricted airflow error codes
Compare dryer codes that usually point to restricted airflow, long dry time, lint, vent, or overheating warnings.
Use this as a narrowing step
A symptom can point to several different parts or installation issues. Use this hub to find likely code records, then confirm the exact code on the appliance display.
Coverage status
This page is published as a comparison hub for matching records. Open the exact code record before using any guidance.
How to narrow it
Stop the dryer and note whether the alert appears with longer drying, a temperature warning, or a specific airflow message. Check only the lint screen and externally accessible vent outlet after the appliance is off and cool; do not open panels or run repeated tests. Airflow and temperature records overlap in visible symptoms, so match the complete code first. A returning warning, burning smell, smoke, or unusual heat needs a service boundary.
restricted airflow
long dry time
temperature warning
Decision trees
Matching records
d80Error code
LG documents d75/d80/d90/d95 as increasing exhaust-restriction warnings; d80 on some gas dryers may instead accompany a gas-supply issue.
tE1Error code
LG documents tE1/tE3 as thermistor-related warnings and separates tE2 in cold steam-cycle conditions; preserve the full suffix before choosing a procedure.
tCError code
Samsung US dryer guidance documents tC with temperature or sensor errors; trapped heat from lint or vent restrictions may be involved.
HCError code
Samsung groups HC, hE, HC4, and 1 HC as heating errors: the dryer is too hot, or some electric dryers may not heat enough because of low voltage.
AFError code
This code commonly appears when the dryer detected restricted airflow through the lint screen or vent system.
AFError code
Maytag documents AF, F4 E3, and Check Vent as restricted-airflow alerts tied to the lint screen or exhaust path.
F3 E1Error code
On supported Maytag dryers, F3 E1 usually indicates an exhaust-thermistor alert.
AFError code
Manufacturer guidance usually ties AF or F4 E3 to restricted dryer airflow.