What to check first
Stop normal operation while this warning is active. Follow only the documented safe checks or protective-drain instructions for the exact model.
Basic checks
- From a dry position, close the dishwasher water-supply valve if it is safely reachable; if the route is wet or unsafe, keep clear and use qualified help.
- Inspect only the floor, cabinet edge, and exposed supply connection from outside the appliance; visible water confirms that the dishwasher must remain off.
- Keep people away from standing water and wet electrical areas, and isolate power only from a safe dry upstream point if moisture is near the plug, outlet, or wiring.
Applicability
Exact model · ASKO DBI565IXXLS.U, DBI565TXXLS.U, and DBI565PXXLS.U dishwashers · North America (United States, Canada, and Mexico manual) · Official user manual 875097-a14
This meaning is limited to ASKO dishwasher models DBI565IXXLS.U, DBI565TXXLS.U, and DBI565PXXLS.U in North American user manual 875097-a14; another ASKO series, model, or market may use a different code table.
Reset or retry steps
- Do not clear F40 and restart the dishwasher; the exact manual directs the user to turn off the water supply and contact Customer Care.
- Leave the water valve closed and the dishwasher unused until qualified service has corrected the leakage condition.
When to call a technician
- Contact ASKO Customer Care for every F40 occurrence because manual 875097-a14 classifies it as inlet valve leakage.
- Seek urgent qualified help if water continues to spread after the valve is closed, the valve cannot be reached safely, or moisture approaches an electrical connection.
Before approving a paid visit, check warranty status and reviewquestions to ask before repair.
Can I keep using it?
Stop normal use when water is visible or a leak warning is active. Stay clear if water could reach wiring or controls.
- Safe next step
- Follow the code-specific shutdown or protective-drain instructions, turn off water when appropriate, and avoid repeated resets. Do not interrupt a documented protective-drain sequence just to clear the display.
- Stop when
- Water is near wiring, cabinetry is getting wet, the leak returns, or the source is not safely visible.
Do not keep using the appliance if the code points to voltage, wiring, control power, burning smell, smoke, or a possible miswired supply.
- Safe next step
- Use only safe owner-level power checks, then involve a qualified technician or electrician when the source points to wiring or supply voltage.
- Stop when
- Breakers trip, lights dim, the appliance smells hot, wiring may be miswired, or the warning returns after a safe reset.
Safety boundaries
Safe first
- Match the exact brand, appliance type, and displayed code first.
- Use the model manual as the final authority for access steps.
- Stop and address visible water before retrying the appliance.
Do not do this
- Do not continue normal cycles while this code is active; any protective-drain sequence must follow the exact model instructions.
- Do not repeatedly reset, tip, or move the appliance to clear a leak code.
- Do not bypass locks, float switches, leak sensors, or other safety systems.
Common causes include
- Inlet valve not containing water as expected
- An inlet connection or internal water-path condition requiring qualified inspection
FAQ
What does ASKO Dishwasher code F40 usually mean?
Manual 875097-a14 documents F40 on these ASKO dishwashers as inlet valve leakage. Model context matters: The reviewed table distinguishes F40 inlet valve leakage from F12/F67 inlet faults and F54 overfilling. Preserve the complete displayed code.
Can I keep using the dishwasher with code F40?
Stop normal operation until the issue and safety warnings have been addressed. Follow only the documented safe checks or protective-drain instructions for your model. An active dishwasher leak can reach live parts; do not touch the appliance, plug, outlet, or standing water from a wet position.
When should I call a technician for ASKO F40?
Contact ASKO Customer Care for every F40 occurrence because manual 875097-a14 classifies it as inlet valve leakage. A qualified technician may check Water inlet valve and Inlet-valve connection against the model's service information before treating any part as failed.