What to check first
Can I keep using it?
Do not keep using the appliance while this warning is active.
Do not keep running the appliance when water is visible, a leak warning is active, or water could reach wiring or controls.
- Safe next step
- Stop the cycle if safe, turn off water when appropriate, protect the floor, and avoid repeated resets until the leak source is understood.
- Stop when
- Water is near wiring, cabinetry is getting wet, the leak returns, or the source is not safely visible.
Do not keep using the appliance if the code points to voltage, wiring, control power, burning smell, smoke, or a possible miswired supply.
- Safe next step
- Use only safe owner-level power checks, then involve a qualified technician or electrician when the source points to wiring or supply voltage.
- Stop when
- Breakers trip, lights dim, the appliance smells hot, wiring may be miswired, or the warning returns after a safe reset.
Safety boundaries
Safe first
- Match the exact brand, appliance type, and displayed code first.
- Use the model manual as the final authority for access steps.
- Stop and address visible water before retrying the appliance.
- Disconnect power before any service-access step.
Do not do this
- Do not keep running the appliance while this code is active.
- Do not disconnect inlet hoses until the water supply is off.
- Do not bypass locks, float switches, leak sensors, or other safety systems.
Common causes include
- Dishwasher water-supply valve closed or not fully open
- Household water pressure outside the manual's 4.2 to 140 psi range
- A second inlet-fault branch that the owner manual does not diagnose further
Basic checks
- From a dry position, confirm that the dishwasher water-supply valve is fully open; if it is stuck, wet, or damaged, stop and use qualified help.
- Compare flow at a nearby cold-water fixture; weak flow there too indicates a household-supply problem rather than identifying a dishwasher component.
- Inspect only the exposed inlet hose without moving the dishwasher; correct a visible kink, but close the valve if the hose or connection leaks.
- Record F67 exactly for Customer Care; the reviewed manual calls it water inlet fault 2 but does not define how its internal branch differs from F12.
Reset or retry steps
- Clear the message once only after normal supply is confirmed, the valve is open, the exposed hose is unrestricted, and all visible connections are dry.
- Stop further retries if F67 returns, filling remains abnormal, or any water appears outside the dishwasher.
When to call a technician
- Contact ASKO Customer Care if F67 persists with the supply valve open and household pressure within 4.2 to 140 psi.
- Use qualified help for pressure measurement, a leaking or seized valve, concealed hose access, or any internal distinction between F67 and F12.
Before approving a paid visit, check warranty status and reviewquestions to ask before repair.
FAQ
What does ASKO Dishwasher code F67 usually mean?
Manual 875097-a14 documents F67 on these ASKO dishwashers as water inlet fault 2. Model context matters: The manual lists F12 as water inlet fault 1 and F67 as water inlet fault 2 but gives both the same owner action. Keep them as distinct displayed codes without inventing a component-level difference.
Can I keep using the dishwasher with code F67?
Do not keep using the appliance until the visible issue has been checked and the relevant safety warnings have been addressed. Close the water supply before any hose work, and isolate power only from a safe dry position if moisture is near the dishwasher.
When should I call a technician for ASKO F67?
Contact ASKO Customer Care if F67 persists with the supply valve open and household pressure within 4.2 to 140 psi. A qualified technician may check Water supply valve, Inlet hose, and Water-inlet system against the model's service information before treating any part as failed.