What to check first
Can I keep using it?
Do not keep using the appliance while this warning is active.
Do not keep running the appliance when water is visible, a leak warning is active, or water could reach wiring or controls.
- Safe next step
- Stop the cycle if safe, turn off water when appropriate, protect the floor, and avoid repeated resets until the leak source is understood.
- Stop when
- Water is near wiring, cabinetry is getting wet, the leak returns, or the source is not safely visible.
Do not keep using the appliance if the code points to voltage, wiring, control power, burning smell, smoke, or a possible miswired supply.
- Safe next step
- Use only safe owner-level power checks, then involve a qualified technician or electrician when the source points to wiring or supply voltage.
- Stop when
- Breakers trip, lights dim, the appliance smells hot, wiring may be miswired, or the warning returns after a safe reset.
Safety boundaries
Safe first
- Match the exact brand, appliance type, and displayed code first.
- Use the model manual as the final authority for access steps.
- Stop and address visible water before retrying the appliance.
- Disconnect power before any service-access step.
Do not do this
- Do not keep running the appliance while this code is active.
- Do not open drain or pump areas while the appliance is powered.
- Do not bypass locks, float switches, leak sensors, or other safety systems.
Common causes include
- Owner-accessible drain filter restricted by debris
- Visible drain hose bent, kinked, or trapped
- Household sink or waste path not draining freely
- A drain-system condition that requires qualified inspection
Basic checks
- Observe whether water remains in the drum after the programme stops; if it does, keep the washer off and do not force the door.
- Inspect only the visible drain hose without pulling out the washer; correct an exposed bend or kink, but stop if the hose is damaged or water is leaking.
- Check whether the connected household sink also drains slowly; use a plumber for blocked household pipework rather than dismantling wet connections around the washer.
- Follow only the CS 148TW4/1-80 manual's owner-accessible filter procedure after disconnecting power from a dry position, letting retained water cool, and preparing a controlled drainage container; stop if safe access or containment is not possible.
Reset or retry steps
- Run one monitored drain-and-spin attempt only after a visible restriction is safely corrected, the owner-accessible filter is correctly reinstalled, and no water is leaking.
- Stop further retries if E3 or three repeated indicator flashes return or water remains in the drum.
When to call a technician
- Contact Candy service if the washer still does not drain after visible hose, household drain, and safely documented filter checks.
- Arrange urgent qualified help if water leaks, reaches an electrical connection, or cannot be contained from a dry position.
Before approving a paid visit, check warranty status and reviewquestions to ask before repair.
FAQ
What does Candy Washer code E3 usually mean?
Candy documents E3 on washer model CS 148TW4/1-80 as an inability to drain water. Model context matters: The CS 148TW4/1-80 manual shows E3 on display models and three indicator flashes followed by a five-second pause on models without a display; E03 is a padded search form, not a separate fault.
Can I keep using the washer with code E3?
Do not keep using the appliance until the visible issue has been checked and the relevant safety warnings have been addressed. Disconnect power from a dry position and let retained wash water cool before using the exact manual's owner-accessible filter procedure.
When should I call a technician for Candy E3?
Contact Candy service if the washer still does not drain after visible hose, household drain, and safely documented filter checks. A qualified technician may check Drain hose, Drain filter, and Drain pump against the model's service information before treating any part as failed.