FaultCodeLab

Symptom hub

Washer not filling error codes

Compare washer codes that usually point to low fill, no fill, water supply, or inlet restrictions.

Matching records: 19

Use this as a narrowing step

A symptom can point to several different parts or installation issues. Use this hub to find likely code records, then confirm the exact code on the appliance display.

Coverage status

This page is published as a comparison hub for matching records. Open the exact code record before using any guidance.

How to narrow it

Check whether the drum receives no water, fills slowly, or begins filling and then pauses. Confirm the hot and cold faucets are open and observe whether another fixture has normal pressure; do not disconnect hoses while the machine is running. A locked door can be a consequence of the fill state, not a separate diagnosis. Match the exact display code before using any record, and stop after one owner-safe supply check if the message returns.

no fill

LG IESamsung 4EMaytag F8 E1GE H2O SupplyFrigidaire E1Electrolux E11

slow fill

LG IESamsung 4EWhirlpool F8 E1Maytag F8 E1Frigidaire E1Electrolux E11

door locked

Whirlpool F8 E1Maytag F8 E1

Decision trees

Decision guide

Washer fill

Cautious owner-level checks for washer no-fill, slow-fill, inlet, and water-supply codes before touching hoses, valves, or panels.

Matching records

LGWasher

IEError code

Most LG sources describe IE as a warning that the washer is not filling with enough water in the expected time.

Official source
SamsungWasher

4EError code

Manufacturer guidance usually ties 4E to a condition where the washer has detected a water supply problem.

Official source
WhirlpoolWasher

F8 E1Error code

Usually indicates that the washer is not detecting the expected incoming water.

Official source
MaytagWasher

F8 E1Error code

This code commonly appears when the washer is not detecting the correct incoming water level.

Official source
GEWasher

H2O SupplyError code

Usually indicates that the washer is not receiving the expected water supply or pressure.

Official source
FrigidaireWasher

E1Error code

Usually indicates that a Frigidaire top-load washer is not filling or is filling too slowly.

Official source
ElectroluxWasher

E11Error code

Manufacturer guidance usually ties E11 to a condition where an Electrolux front-load washer is not filling during the wash phase.

Official source
CandyWasher

E2Error code

Candy documents E2 on washer model CS 148TW4/1-80 as an inability to load water.

Official source
DefyWasher

E1Error code

Defy's DTL165 manual documents E1 when water intake into the top-loader is very slow.

Official source
GorenjeWasher

E:03Error code

Gorenje documents E:03 on washing machine WNEI14BS as a water-filling error.

Official source
MideaWasher

E10Error code

Midea documents E10 on washer model MLH27N5AWWC as a water-injection problem during washing.

Official source
NEFFWasher

E17Error code

NEFF UK documents E17/F17 as a washer water-supply timeout.

Official source
PanasonicWasher

U14Error code

Panasonic New Zealand documents U14 on washer model NA-V10FR1WAU as unable to supply water.

Official source
AmanaWasher

F8 E1Error code

Manufacturer guidance usually ties F8 E1, LF, or Lo FL to low incoming water detection.

Official source
HaierWasher

E4Error code

Manufacturer guidance usually ties E4 to a portable-washer fill issue involving supply or pressure.

Official source
HooverWasher

E2Error code

Hoover documents E2 on washer model H3W492DE/1-80 as a water-loading problem.

Official source
Speed QueenWasher

Er, FLError code

Usually indicates that the washer did not reach its fill level after 30 minutes.

Official source
Speed QueenWasher

Er, PSError code

Usually indicates trouble sensing the washer's fill level.

Official source
ToshibaWasher

E10Error code

Toshiba Hong Kong documents E10 for front-load washers as a water-injection issue during washing.

Official source

Install FaultCodeLab