What to check first
Can I keep using it?
Do not keep using the appliance while this warning is active.
Do not keep running the appliance when water is visible, a leak warning is active, or water could reach wiring or controls.
- Safe next step
- Stop the cycle if safe, turn off water when appropriate, protect the floor, and avoid repeated resets until the leak source is understood.
- Stop when
- Water is near wiring, cabinetry is getting wet, the leak returns, or the source is not safely visible.
Do not keep using the appliance if the code points to voltage, wiring, control power, burning smell, smoke, or a possible miswired supply.
- Safe next step
- Use only safe owner-level power checks, then involve a qualified technician or electrician when the source points to wiring or supply voltage.
- Stop when
- Breakers trip, lights dim, the appliance smells hot, wiring may be miswired, or the warning returns after a safe reset.
Safety boundaries
Safe first
- Match the exact brand, appliance type, and displayed code first.
- Use the model manual as the final authority for access steps.
- Stop and address visible water before retrying the appliance.
- Disconnect power before any service-access step.
Do not do this
- Do not keep running the appliance while this code is active.
- Do not disconnect inlet hoses until the water supply is off.
- Do not bypass locks, float switches, leak sensors, or other safety systems.
Common causes include
- Water tap closed or household flow too low
- Visible inlet hose kinked, twisted, or damaged
- User-accessible inlet filter restricted by scale or debris
- Drain installation interfering with the expected water path
Basic checks
- Confirm that the dishwasher water tap is fully open; if another nearby tap also has weak or no flow, contact the water supplier or a plumber before retrying the dishwasher.
- Inspect the visible inlet hose without pulling out the appliance; if it is kinked or twisted, correct only the exposed routing, but stop if the hose is damaged.
- Compare the filter location with the exact product manual before closing the tap and disconnecting a hose; if the manual does not show owner access, leave the connection intact for service.
- Observe the user-accessible tub filter and visible drain-hose routing only after disconnecting power; if standing water, damage, or a hidden connection blocks safe access, stop.
Reset or retry steps
- Try one monitored programme only after normal household flow is confirmed, visible hoses are sound, every owner-accessible filter is correctly reinstalled, and no water is leaking.
- Stop further retries if i10 or a documented display variant returns or the dishwasher still does not fill normally.
When to call a technician
- Contact Zanussi service if the code returns with normal household flow, an open tap, and no visible hose restriction.
- Keep the appliance off and arrange prompt service if a hose is damaged, water leaks, or moisture is near the cord, plug, or outlet.
Before approving a paid visit, check warranty status and reviewquestions to ask before repair.
FAQ
What does Zanussi Dishwasher code i10 usually mean?
A water-inlet problem may prevent the dishwasher from filling. Model context matters: Zanussi UK groups i10, i11, AL5, C1, and F1 with one water-inlet condition; some controls may instead beep or flash once.
Can I keep using the dishwasher with code i10?
Do not keep using the appliance until the visible issue has been checked and the relevant safety warnings have been addressed. Close the water tap and disconnect power from a dry position before any hose or inlet-filter access explicitly allowed by the exact product manual.
When should I call a technician for Zanussi i10?
Contact Zanussi service if the code returns with normal household flow, an open tap, and no visible hose restriction. A qualified technician may check Inlet hose, Inlet filter, and Water inlet valve against the model's service information before treating any part as failed.