What to check first
Can I keep using it?
Do not keep using the appliance while this warning is active.
Do not keep running the appliance when water is visible, a leak warning is active, or water could reach wiring or controls.
- Safe next step
- Stop the cycle if safe, turn off water when appropriate, protect the floor, and avoid repeated resets until the leak source is understood.
- Stop when
- Water is near wiring, cabinetry is getting wet, the leak returns, or the source is not safely visible.
Do not keep using the appliance if the code points to voltage, wiring, control power, burning smell, smoke, or a possible miswired supply.
- Safe next step
- Use only safe owner-level power checks, then involve a qualified technician or electrician when the source points to wiring or supply voltage.
- Stop when
- Breakers trip, lights dim, the appliance smells hot, wiring may be miswired, or the warning returns after a safe reset.
Safety boundaries
Safe first
- Match the exact brand, appliance type, and displayed code first.
- Use the model manual as the final authority for access steps.
- Disconnect power before any service-access step.
Do not do this
- Do not keep running the appliance while this code is active.
- Do not open drain or pump areas while the appliance is powered.
- Do not bypass locks, float switches, leak sensors, or other safety systems.
Common causes include
- Blocked drain pump
- Loose pump cover
- Kinked drain hose
- Blocked filter area
Basic checks
- Check for standing water.
- Review the manual before accessing the filter and pump cover.
- Check visible drain hose routing.
- Check for standing water after the cycle stops; if water remains, treat the issue as an active drain restriction.
- Inspect the visible drain hose for kinks or crushing; if routing is pinched, correct it before a retry.
- Listen for normal drain-pump activity from outside the cabinet; if it stays silent or loud, stop further retries.
Reset or retry steps
- After safe cleaning and reassembly, run a short cycle only if there are no leaks.
When to call a technician
- Call service if the code returns after safe filter and hose checks.
- Call service if the pump cover cannot be seated properly.
Before approving a paid visit, check warranty status and reviewquestions to ask before repair.
FAQ
What does Bosch Dishwasher code E24 usually mean?
Manufacturer guidance usually ties E24 to a condition where the dishwasher is not draining properly. Model context matters: Pump cover access differs by model.
Can I keep using the dishwasher with code E24?
Do not keep using the appliance until the visible issue has been checked and the relevant safety warnings have been addressed. Disconnect power before accessing internal filter or pump areas.
When should I call a technician for Bosch E24?
Call service if the code returns after safe filter and hose checks. A qualified technician may check Drain pump cover, Drain pump, Drain hose, and Filter assembly against the model's service information before treating any part as failed.