What to check first
Can I keep using it?
Do not keep using the appliance while this warning is active.
Do not keep running the appliance when water is visible, a leak warning is active, or water could reach wiring or controls.
- Safe next step
- Stop the cycle if safe, turn off water when appropriate, protect the floor, and avoid repeated resets until the leak source is understood.
- Stop when
- Water is near wiring, cabinetry is getting wet, the leak returns, or the source is not safely visible.
Do not keep using the appliance if the code points to voltage, wiring, control power, burning smell, smoke, or a possible miswired supply.
- Safe next step
- Use only safe owner-level power checks, then involve a qualified technician or electrician when the source points to wiring or supply voltage.
- Stop when
- Breakers trip, lights dim, the appliance smells hot, wiring may be miswired, or the warning returns after a safe reset.
Safety boundaries
Safe first
- Match the exact brand, appliance type, and displayed code first.
- Use the model manual as the final authority for access steps.
- Disconnect power before any service-access step.
Do not do this
- Do not keep running the appliance while this code is active.
- Do not open drain or pump areas while the appliance is powered.
- Do not bypass locks, float switches, leak sensors, or other safety systems.
Common causes include
- Drain pump blocked by debris
- Drain pump cover loose
- Drain pump cover missing or not seated
Basic checks
- Stop the cycle if safe.
- Check for standing water.
- Review Bosch instructions before accessing pump or filter areas.
- Check for standing water after the cycle stops; if water remains, treat the issue as an active drain restriction.
- Inspect the visible drain hose for kinks or crushing; if routing is pinched, correct it before a retry.
- Listen for normal drain-pump activity from outside the cabinet; if it stays silent or loud, stop further retries.
Reset or retry steps
- Retry only after safe cleaning, proper reassembly, and no visible leak.
When to call a technician
- Call Bosch support if E25 returns after safe drain-area checks.
- Call service if the pump cover is damaged, missing, or cannot be seated.
Before approving a paid visit, check warranty status and reviewquestions to ask before repair.
FAQ
What does Bosch Dishwasher code E25 usually mean?
Commonly logged when the drain pump is blocked or the pump cover is loose or missing. Model context matters: Pump cover design and access differ by dishwasher series.
Can I keep using the dishwasher with code E25?
Do not keep using the appliance until the visible issue has been checked and the relevant safety warnings have been addressed. Disconnect power before accessing drain components.
When should I call a technician for Bosch E25?
Call Bosch support if E25 returns after safe drain-area checks. A qualified technician may check Drain pump, Pump cover, and Filter assembly against the model's service information before treating any part as failed.